How Do I Upload Data From Dexcom G4 Transmitter
Supported Uploaders⌁
An Uploader is a mechanism or organization for uploading the CGM data from your sensor to your Nightscout site. This can be either an electronic solution (usually for older devices), or just a simple app installed on your phone (for most newer systems) that connects to the sensor/pump and then uploads this data.
The type of Uploader needed will depend on the type of CGM system being used. In this page, we will intermission the different systems down by manufacturer, then further by sensor type.
Once you are clear almost the type of sensor and upload arrangement you will be using, you tin can find detailed configuration information for each one hither.
Dexcom⌁
Dexcom G5/G6⌁
If you lot are using the Dexcom G5 and G6 sensors connected to the Dexcom app on your telephone, it will upload directly to the Dexcom servers (likewise withal known every bit "Dexcom Share") and you won't need to utilise any extra uploader or master device.
For this to work, Nightscout must be configured to use the bridge plug-in and will so automatically pull the CGM data straight from the Dexcom servers in real-fourth dimension.
Note
If you employ a DIY airtight loop system information technology is recommended that you let it upload to Nightscout instead of importing information using Dexcom Share and the bridge plugin.
Please annotation that at this fourth dimension (early on 2021), the Dexcom G5 arrangement is effectively obsolete only many people are still using stocks of old sensors and transmitters.
If you don't want to use the official Dexcom apps, then y'all can utilize open up-source software apps for your Dexcom sensor to connect, display, alarm and also upload to Nightscout:
Android: xDrip+ for G4, G5 and G6.
iOS: Spike or xDrip4iOS for G4, G5 and older G6 transmitters (not Firefly)
Dexcom "Firefly" Transmitters
Whatsoever transmitter made before Dexcom switched to the "firefly" range of G6 transmitters is compatible with Spike or xDrip4iOS. Although there are slight physical differences, the easiest way to check is to wait at the Transmitter ID. If it starts with 80xxxx or 81yxxx (where y is a number) and then information technology is a pre-Firefly transmitter and is compatible.
Most of the useable transmitters that fall into this category at the nowadays fourth dimension (early on 2021) are generally rebatteried or rechargeable/modified 80xxxx or 81xxxx transmitters.
Loop and AAPS will upload your data directly to Nightscout and volition act as uploaders.
Dexcom G4 (now obsolete)⌁
The Dexcom G4 organization is at present Dexcom G4 requires additional hardware, similar a Wixel, an xDripKit or a compatible Android telephone with an OTG cablevision continued to the receiver.
Dexcom G4 Platinum (Share) requires you to carry the receiver to forward information to the uploader.
Medtronic⌁
If your sensor system is able to directly upload to CareLink and so Nightscout might exist able to get the data directly from the cloud using the mmconnect plugin. Unfortunately, this is not possible anymore using Heroku without a bridge device.
You lot can utilize an Android phone with a private version of xDrip+ (come across also here for a customized version for smartbands), a computer or a Raspberry Pi to bridge CareLink to Nightscout.
If this isn't an option and your sensor/transmitter is connected to your pump (Medtronic 600 series pumps), and so you'll need an Android phone continued with an OTG cable to your pump'due south connected glucose meter. The phone will need to run the 600 Serial Uploader app.
Glucomen Solar day⌁
You can forrad your data from GlucoLog Spider web using an AWS bridge documented here.
Tandem t:slim X2⌁
You can synchronize your treatments one manner from your Tandem Diabetes t:connect spider web/mobile awarding to Nightscout using a bridge app running via Pipenv or Docker equally documented here.
Abbott Freestyle Libre⌁
Non Bluetooth-enabled Freestyle Libre sensors will need an additional transmitter device fixed on elevation of the sensor to send readings to the uploader device. In release order hither are some transmitter options: LimiTTer, BlueReader, Blucon, MiaoMiao, Bubble, and Droplet.
Transmitter Compatibility
The Libre environment is complex and evolves quickly. Before buying a transmitter, delight join the corresponding Facebook groups and make sure that the transmitter you are planning to buy is compatible with your sensor blazon.
Most of the transmitters have their own proprietary apps. About all of these back up the uploading of data to Nightscout (LinkBluCon, Tomato, Diabox, eDroplet, ...). Again, check the transmitter manufacturer's website and the relevant Facebook support groups for information.
Open-source apps such as xDrip+, Spike and xDrip4iOS also support most of the above transmitter devices.
You tin can connect to the Libre 2 sensor (EU only) without an additional transmitter using xDrip+, Diabox or xDrip4iOS.
Eversense⌁
In order to get data from the Eversense CGM system, you will need to use the ESEL app running on an Android telephone.
Source: https://nightscout.github.io/uploader/uploaders/
0 Response to "How Do I Upload Data From Dexcom G4 Transmitter"
Post a Comment